Tekslide

Tekslide

TEKSLIDE
HIGH PERFORMANCE FLUOROPOLYMER MATERIALS Beside the wide range of the existing PTFE products, GUARNIFLON® developed the TEKSLIDE products, PTFE compounded grades used in the processing of tapes, bearing tapes and machined parts retaining the usual and well known conventional PTFE advantages improved at the same time by some enhanced properties:
Download Catalogue

Format PDF - 2.7 Mb

  • low coefficient of friction
  • high resistance and hardness
  • low cold flow
  • extreme temperature applications
  • very higt pressure resistance

GUARNIFLON® TEKSLIDE products can be supplied etched in order to allow the most performing applications in the mechanical and other tribological fields.
Special compounds not included in this catalogue available on request.

TRIBOLOGICAL PROPERTIES

  • Excellent performance in dry conditions at higt PV values, the product of operating pressure and surface velocity. The PV value in dry conditions ( max 1.7 MPa x M/S ) can be widely overcame in case of lubricated applications
  • Extremely low coefficient of friction static and dynamic
  • Extremely low stick-slip effect
  • Excellent wear resistance even in dry applications

THERMAL PROPERTIES

  • Stable behavior at operating temperatures from -240° C to +260° C and for short time up to +280° C
  • Dimensional stability
  • Excellent thermal dissipation capacity ( specific grades )

CHEMICAL PROPERTIES

  • Excellent chemical inertness
  • TEKSLIDE materials can operate in salt water, in steam environment or aggressive and corrosive chemical environments
  • Good gas proof properties (specific grades)

ELECTRICAL PROPERTIES

  • According to different grades of TEKSLIDE materials the following properties can be enhanced:
  • Good dielectric properties (insulation)
  • Excellent conductivity properties for antistatic applications

MECHANICAL PROPERTIES

  • Extremely high PV and sliding behavior
  • High load compression resistance (radial/axial)
  • Low abrasive surface for applications on soft countersurfaces
  • Excellent vibration dampening and noiseless

OTHER TYPICAL PROPERTIES

  • Flexibility and fatigue stress resistance
  • Some of the TEKSLIDE materials are atoxic and excellent for food contact and food industry applications
MATERIALS SELECTION GUIDE
Products G471 G461 G729 G453 G412 G418 G479 G464 G416 G506 G458
G488
G417
G548
Color DarkRed Yellow White Black DarkGrey GreyBlue LightBrown Green Brown Brown Brown
Max Load “P” (psi) 1 750 1 1 1 1 1,2 1 1 1,2 1,2
MPa 6,9 5,2 6,9 6,9 6,9 6,9 8,3 6,9 6,9 8,3 8,3
Max Speed “V”(fpm) 400 400 400 400 400 400 400 400 400 400 400
m/s 2 2 2 2 2 2 2 2 2 2 2
Max “PV” (psi-fpm) 10 7,5 10 10 10 10 10 10 10 10 10
(MPa•m/s) 0,35 0,26 0,35 0,35 0,35 0,35 0,35 0,35 0,35 0,35 0,35
Rb 25 & higher X X X X X X
Rc 35 & higher X X X X X
Painted metal and porcelain X
Aluminium X X
FDA Compliant X X X
Steam X X X X X X X X X X
Wet X X X X X X X X X X
Dry X X X X X X X X X X X
Vacuum X X X X X X X X X
Coefficient of friction* 4 1 1 2 2 3 1 2 2 2 2
Creep resistance* 4 3 4 4 4 4 4 5 5 5 5
Insulative prop. YES YES YES NO NO YES YES NO NO NO NO

*Relative Rating: 1 low – 5 high

G471 | Our standard TEKSLIDE bearing grade. Higt Creep and Abrasion resistance.
G461 | Lowest Coefficient of friction of TEKSLIDE series. Excellent insulator.
G729 | Widely used in the food process industry.
G453 | Very good operation in wet environments.
G412 | Good thermal and electrostatic dissipation.
G418 | Excellent abrasion resistance.

G479 | The best TEKSLIDE against alluminium surfaces.
G464 - G488 - G417 - G548 | Extensively used machine tool guide ways.
G416 | Guide ways and piston rings
G506 | Guide ways
G458 | Piston Rings

Bearing Tapes
All kinds of bearings are available in standard materials as well as G471, G461 and G464, for the heaviest applications in the hydraulic, motion control and mechanical fields. They’re made by special PTFE compounds and technologies, in order to fulfil GUARNIFLON’s customers’ requirements.

Special fillers are selected to enhance properties such as:

  • wear resistance
  • coefficient of friction
  • compression strength

Thickness from mm. 1,5 to mm. 5
Width from mm. 4 to mm. 300

Rings
Whenever the chemical and thermal resistance of standard rings in static applications like static seals or flange connections is no longer sufficient, PTFE rings are the solution. Standard dimensions as well as special dimensions under customer specifications are available.

Tapes
Most materials can be skived thanks to the technologies available nowadays in GUARNIFLON® up to mm. 6 according to customers’needs. TEKSLIDE tapes show excellent performance for applications where friction reduction is required.

Machined Products
Automatic turning machines as well as CNC machines can produce more than 1.5 million pieces per day. To ensure high and stable quality standards, GUARNIFLON® is running the electronic system S.P.C. (Statistical Process Control).

Etching Technology for Bounding Purposes
Guarniflon® owns the most updated technologies dedicated to the etching process on semifinished and finished products. The etching process of GUARNIFLON® is capable of providing uniform reactive surfaces.

DRY COEFFICIENT OF FRICTION
STATIC ASTM D3702

G471 | MIN 0.08 - MAX 0.20
G461 | MIN 0.05 - MAX 0.15
G729 | MIN 0.10 - MAX 0.20
G453 | MIN 0.06 - MAX 0.18
G412 | MIN 0.05 - MAX 0.15
G418 | MIN 0.10 - MAX 0.20
G479 | MIN 0.05 - MAX 0.15
  G464 | MIN 0.07 - MAX 0.18
G488 | MIN 0.07 - MAX 0.18
G417 | MIN 0.07 - MAX 0.18
G548 | MIN 0.07 - MAX 0.18
G416 | MIN 0.07 - MAX 0.20
G506 | MIN 0.10 - MAX 0.20
G458 | MIN 0.10 - MAX 0.25

DRY COEFFICIENT OF FRICTION
DYNAMIC ASTM D3702

G471 | MIN 0.05 - MAX 0.20
G461 | MIN 0.10 - MAX 0.20
G729 | MIN 0.15 - MAX 0.23
G453 | MIN 0.12 - MAX 0.25
G412 | MIN 0.07 - MAX 0.15
G418 | MIN 0.08 - MAX 0.18
G479 | MIN 0.10 - MAX 0.20
  G464 | MIN 0.15 - MAX 0.25
G488 | MIN 0.15 - MAX 0.25
G417 | MIN 0.15 - MAX 0.25
G548 | MIN 0.15 - MAX 0.25
G416 | MIN 0.15 - MAX 0.25
G506 | MIN 0.15 - MAX 0.25
G458 | MIN 0.15 - MAX 0.30

DEFORMATION UNDER LOAD
MAX TYPICAL VALUE
Room temperature 24 hours at 13.7 N/mm2 - ASTM D621

Max Tipical Value %    
G471 | 9
G461 | 8
G729 | 14
G453 | 7
G412 | 10
G418 | 8
G479 | 13
  G464 | 8
G488 | 8
G417 | 8
G548 | 8
G416 | 8
G506 | 6,5
G458 | 6

COMPRESSIVE STRENGTH
MIN. TYPICAL VALUE
At 1% Deformation ASTM D695

Min Tipical Value %    
G471 | 8
G461 | 6
G729 | 5
G453 | 7
G412 | 6,5
G418 | 8
G479 | 7
  G464 | 8
G488 | 8
G417 | 8
G548 | 8
G416 | 8
G506 | 8
G458 | 10

WEAR RATE COMPARISON AT PV 0,7
TEKSLIDE® MATERIALS VS. TRADITIONAL PTFE

pv 0,700,7 N/mm2 x 1 m/s
Colors label:
• VIRGIN PTFE AT pv 015
• PTFE FILLED with 25% carbon
TEKSLIDE® materials

COMPARISON OF COMPRESSIVE LOAD
VS. DEFORMATION OF SOME TEKSLIDE® GRADES

Percent strain (%)
Colors label:
TEKSLIDE® 853
TEKSLIDE® 861
TEKSLIDE® 871

NEWS& EVENTS

Wednesday, 28 February 2024 11:29

SUPPLIER ENGAGEMENT DAY – UK-FEBRUARY 28, 2024

1 day event in UK fully targeted to the Automotive segment, Maceplast UK with the GM Janine Ward and Guarniflon Technical Manager Giacomo Simoni joining the event.

Read More
Monday, 19 February 2024 13:19

Hannover Messe 2024 – Guarniflon will be there

Guarniflon is joining one of the most representative industrial shows in Europe, Hannover Messe, from 22 to 26 of April, taking part at the coolest event gathering more than 300 international companies related to hydrogen and fuel cells applications.

Read More

Survey No. 116/1 &116/2, Village Kala,
Amboli Silvassa 396230,
Dadra & Nagar Haveli India
Phone: +91.7575008728

FOLLOW US IN LINKEDIN
FOLLOW US IN YOUTUBE