Tekfilm

Back

Tekfilm

The Tekfilm film range includes PTFE, FEP, PFA, MFA skived films and tapes in addition to melt extruded FEP, ETFE, PFA, THV, PVDF films and tapes.

Film modifications available for direct use in customers’ application:
  • flattering
  • calendering
  • surface treatment: Sodium Naphthalene chemical etching, corona treatment
  • adhesive coating
Skived

GFI - ULTRA FLAT PTFE SKIVED TEKFILM

A proprietary flattening process is used to produce an ultraflat film eliminating the curling effect typical of the PTFE skived film.

CODE TYPE THICKNESS (mm) MAX WIDTH (mm) COLOUR ROLL LENGTH
GFI 400 Ultra Flat Film from 0,025 to 0,508 1500 Natural To customers’ specifications

CALFIM GF - CALENDERED PTFE SKIVED TEKFILM

Oriented high modulus PTFE skived films and tapes. The main benefit are:
  • higher elastic modulus
  • higher dieletric strength
  • lower porosity
  • reduced cold flow
  • better trasparency
CODE TYPE THICKNESS (mm) MAX WIDTH (mm) COLOUR ROLL LENGTH (mt)
CALFILM G400 Calendered Film 0,051 600 * Natural 600-660
CALFILM G511 Calendered Film 0,051 600 * Orange 600-660
CALFILM G481 Calendered Film 0,051 600 * Blue 600-660

*Tape on request

Tekfilm
Tekfilm
Tekfilm
Tekfilm

FEP - PFA - MFA - THERMOPROCESSABLES FLUOROPOLYMER SKIVED TEKFILM

High molecular weight grades transformed with a proprietary hot compression molding process and skived

CODE TYPE THICKNESS (mm) MAX WIDTH (mm) COLOUR ROLL LENGTH
FEP 2000S FEP from 0,05 to 3 1200 Natural To customers’ specifications
PFA 2400S PFA from 0,025 to 3 1200 Natural To customers’ specifications
MFA 3000S MFA from 0,05to 3 1200 Natural To customers’ specifications
Extruded

THERMOPROCESSABLE FLUOROPOLYMER EXTRUDED TEKFILM

Melt extruded films processed with state of the art technologies in very thin thicknesses (down to 12.5 μm) at wide width (up to 2000 mm)

FEP

CODE FEP2000E
TYPE COLOUR ROLL LENGTH
Cast extruded film *Red/Clear To customers’ specifications
THICKNESS [μ] WIDTH MAX [mm]
13 1750
20 1780
25 1780
50 1850
100 1950
>100 2000
Max. 250  
Standard offerings: Sheets Width 1220 mm / Thickness 0,013 mm / Length 150 M / Colour Red
Perforation capability available
*Other colours available

ETFE

CODE ETFE2600E
TYPE COLOUR ROLL LENGTH
Cast extruded film *Blue/Clear To customers’ specifications
THICKNESS [μ] WIDTH MAX [mm]
15 1750
20 1780
25 1780
50 1850
100 1950
>100 2000
Max. 300  
Standard offerings: Sheets Width 1220 mm / Thickness 0,020 mm / Length 150 M / Colour Blue
Perforation capability available
*Other colours available

PFA

CODE PFA2400E
TYPE COLOUR ROLL LENGTH
Cast extruded film Transparent To customers’ specifications
THICKNESS [μ] WIDTH MAX [mm]
25 1750
50 1800
100 1850
>100 1850
Max. 200  
Standard offerings: Strips of Width 50-100 mm / Thickness 0,050 mm / Length 500 M
Perforation capability available

PVDF

CODE PVDF2800B
TYPE COLOUR ROLL LENGTH
Blow extruded film Clear To customers’ specifications

THICKNESS [μ] WIDTH MAX [mm]
50 1800
100 1850
150 1850
Standard offerings: Strips of Width 50-100 mm / Thickness 0,050 mm / Length 500 M

THV

CODE THV2200E
TYPE COLOUR ROLL LENGTH
Cast extruded film *Clear To customers’ specifications

THICKNESS [μ] WIDTH MAX [mm]
75 1800
100 1900
>100 2000
Standard offerings: Tapes Width 50-75-100 mm / Thickness 0,100 mm / Length 250 M
Food grade available & conductive (black)

NEWS& EVENTS

Friday, 19 April 2024 20:22

MODIFIED PTFE MEMBRANES AND DIAPHRAGMS

Being critical components in pumps and hydraulic devices, membranes and diaphragms are produced by different technologies and processes with a range of PTFE grades.

Read More
Tuesday, 09 April 2024 10:29

MAZZA HOLDING & GUARNIFLON® JOINING NGV ITALY EVENT IN ROME – APRIL 10, 2024

Mazza Holding Spa & Guarniflon®Spa are joining tomorrow the event organized by NGV Italy concerning the use of GNL and biofuels for today’s and tomorrow’s transportations.

Read More

Survey No. 116/1 &116/2, Village Kala,
Amboli Silvassa 396230,
Dadra & Nagar Haveli India
Phone: +91.7575008728

FOLLOW US IN LINKEDIN
FOLLOW US IN YOUTUBE
FLUOROBASED SPECIALTIES MADE IN EUROPE FOR THE INDIAN MARKET
PTFE COMMODITIES MADE IN INDIA FOR THE INDIAN MARKET

Built with HTML5 and CSS3 Copyright © 2020 Guarniflon India PVT., LTD.

Privacy Policy - Contacts Us - Login
Siti Web Bergamo Teknet S.r.l.

NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it. Learn more

I understand

PRIVACY E COOKIES

PRIVACY

VENDOR PRIVACY POLICY
Pursuant to Legislative Decree no. 196/2003, and EU Regulation no. 679/2016 (GDPR), and with respect to your personal information subject to processing, we take this opportunity to provide you the following information.

DATA-PROCESSING PURPOSES
Guarniflon India PVT., LTD. a company with registered office on Survey No. 116/1 &116/2, Village Kala , Amboli Silvassa 396230, Dadra & Nagar Haveli India, appearing herein as Data Controller, shall process vendor data for the following purposes:
a) Vetting (financial position, economic and organisational capacity, references, professional qualifications, withholding compliance, insurance coverage, conflicts of interest, anti-corruption and anti-money-laundering compliance, potential reputational impact of the relationship);
b) Vendor contract management;
a) Compliance with applicable law, regulation, or EU statute, or any order issued by any authority mandated by statute, or by any supervisory or control body.

LEGAL BASIS FOR THE DATA PROCESSING
Please note your personal data shall be processed in the following situations, and pursuant to the following legal bases:
a) Processing is necessary to perform under a contract to which you are privy, or for the carrying out of any pre-contractual measures implemented at your request;
b) Processing is necessary to discharge a legal duty incumbent on the Data Controller;
c) Processing is necessary for Data Controller to pursue a legitimate interest; legitimate interests shall include:
   - The interest in executing, managing, and performing those contracts identified in subsection 1(b) hereof;
   - The interest to protect any rights arising - be it directly or indirectly - from the aforementioned contracts;
Provided no interest, right, or fundamental liberty on the part of Data Subject, and requiring the protection of any personal data, trumps the same.

DATA PROCESSING METHODS
The processing of personal data may be performed with the aid of analogue, electronic, or otherwise automated instruments, with methods and procedures strictly related to the pursuit of the foregoing purposes. Company carries out processing directly through parties within its own organisation, or in outsourcing.
Such parties shall process data pursuant to instructions provided by Data Controller, as either authorised persons or processors, and solely in the pursuit of specific purposes as stated herein; or, if independent data controllers, then autonomously.

DATA DISCLOSURE
Personal data - solely for the purposes appearing in point 1 - may be disclosed to:
a) Data Controller employees or associates duly authorised by the same to process data;
b) Credit institutions, service companies for the recording, packaging, transport, and handling of documents, subcontractors tasked with projects or construction, service providers, notaries, attorneys, experts, consultants, collections companies, auditing firms;
c) Entities to whom disclosure is required in compliance with any collective-bargaining agreement (e.g. a labour union) or specific regulatory duties (e.g. police force or other public authority).
The data shall not be disseminated.

DATA SUBJECT RIGHTS
Data-protection regulations (see Art. 12-22 of EU Regulation no. 679/2016) guarantee the right to be advised of data processing, the right to access the data themselves at any time, and to request such data be updated, supplemented, or corrected. Where the criteria established by the law are met, the Data Subject may also exercise the right to have the data deleted, limit their processing, object to processing, to avoid being subject to decisions based solely on automated processing, and the right to data portability.
Should personal-data processing be predicated on Data Subject consent, the Data Subject shall have the right to revoke such consent.
To exercise your rights - and for more detailed information regarding the parties or categories of parties to whom data might be disclosed, or who might have access to the same as data processors or authorised persons - please contact Company’s Data Protection Officer and/or via email at privacy@guarniflon.com.
Should you believe your rights have been infringed upon, you may protect your rights by lodging a complaint with the Data Protection Authority.

DATA RETENTION PERIOD
Personal data shall be retained for so long as is necessary to realise the purposes appearing in point 1 herein; following the achievement of such objectives, the data may be retained until the rights accruing to you and to Data Controller from the legal relationship have lapsed with respect to any facts directly or indirectly related to the purposes themselves.

PROCESSING OF THIRD-PARTY DATA
The vendor is on notice that should it avail itself of any employee or associate (including any subcontractor) to perform services for the benefit of Data Controller, such third party’s data may be processed by Company, acting likewise as Data Controller, for the purposes appearing in subsection 1(b) herein (management of communication with supplier contact persons and delegates). Such processing shall have the same goals, methods, and retention period as the data otherwise described in the instant policy; furthermore, with respect to such processing, data subjects shall have the same rights identified in point 6 herein.
Vendor agrees to properly advise its own employees and associates with respect to such processing, including but not limited to by providing the instant policy to them, and by recording their signature in acknowledgement whereof.

Webmail
Reserved Area